Show / Hide Table of Contents

    Enum HoleType

    These hole types match up to kinds of holes to drill

    Namespace: DesignData.SDS2.Setup
    Assembly: DesignData.SDS2.Setup.dll
    Syntax
    public enum HoleType

    Fields

    Name Description
    AnchorBolt

    A hole intended for anchor bolts on a column base plate

    ClevisPinHole
    CNCBendMark
    CNCConverted
    Cope

    A hole in the radius of a cope. These holes are not matchable on other material.

    ErectionPin

    A hole on the end of a column for use by cranes, to lift the column into place.

    Grout

    A hole for pouring grout under a base plate

    LongSlot

    Similar to a ShortSlot, but with a longer slot length (2.5" for a 1" diameter bolt)

    MachineToolHole
    Oversize

    A round hole, typically 3/16ths of an inch larger than the input bolt diameter.

    PlugWeld

    A hole added before plug welding. These are not matchable to other material.

    ShortSlot

    An oblong shaped hole, diameter is typically 1/16th of an inch larger than the input bolt diameter.

    StandardRound

    A standard, perfectly round, hole.

    UserSlot1

    Slot holes controlled by user driven slot settings in job setup.

    UserSlot2

    Slot holes controlled by user driven slot settings in job setup.

    Vent

    A vent or drain hole for galvanizing. These are not matchable to other material.

    Back to top