Class CopeShopWeldN3

Designates weld preparation and/or a cut to remove part of the top/bottom flange plus part of the web.

Inheritance
System.Object
FlangeCutOperation
CopeShopWeldN3
Inherited Members
System.Object.Equals(System.Object)
System.Object.Equals(System.Object, System.Object)
System.Object.GetHashCode()
System.Object.GetType()
System.Object.MemberwiseClone()
System.Object.ToString()
System.Object.ReferenceEquals(System.Object, System.Object)
Namespace: DesignData.SDS2.Model
Assembly: DesignData.SDS2.Model.dll
Syntax
public sealed class CopeShopWeldN3 : FlangeCutOperation

Constructors

CopeShopWeldN3()

Declaration
public CopeShopWeldN3()

Properties

ClipWeb

How many inches to clip back the web at the edge of the cope.

Declaration
public LockableDouble ClipWeb { get; set; }
Property Value
Type Description
LockableDouble
Remarks

If this cut operation is on a material, then lockables are always in a locked state. For members, the locked state matters. When assigning one of these values using a primitive double, it will lock and assign that value. When working directly with the LockableDouble, you will need to lock the value in addition to assigning it to override the system value.

Depth

The depth of the cope from the flange, perpindicular to the length

Declaration
public LockableDouble Depth { get; set; }
Property Value
Type Description
LockableDouble
Remarks

If this cut operation is on a material, then lockables are always in a locked state. For members, the locked state matters. When assigning one of these values using a primitive double, it will lock and assign that value. When working directly with the LockableDouble, you will need to lock the value in addition to assigning it to override the system value.

GrooveAngle

Angle of the bevel on the flange

Declaration
public LockableDouble GrooveAngle { get; set; }
Property Value
Type Description
LockableDouble
Remarks

If this cut operation is on a material, then lockables are always in a locked state. For members, the locked state matters. When assigning one of these values using a primitive double, it will lock and assign that value. When working directly with the LockableDouble, you will need to lock the value in addition to assigning it to override the system value.

Length

The length of the cope along the work point line

Declaration
public LockableDouble Length { get; set; }
Property Value
Type Description
LockableDouble
Remarks

If this cut operation is on a material, then lockables are always in a locked state. For members, the locked state matters. When assigning one of these values using a primitive double, it will lock and assign that value. When working directly with the LockableDouble, you will need to lock the value in addition to assigning it to override the system value.

ReEntrantRadius

The radius of the corner of the cope

Declaration
public LockableDouble ReEntrantRadius { get; set; }
Property Value
Type Description
LockableDouble
Remarks

If this cut operation is on a material, then lockables are always in a locked state. For members, the locked state matters. When assigning one of these values using a primitive double, it will lock and assign that value. When working directly with the LockableDouble, you will need to lock the value in addition to assigning it to override the system value.

Methods

Dispose(Boolean)

Declaration
protected override void Dispose(bool disposing)
Parameters
Type Name Description
System.Boolean disposing
Overrides