Enum HoleType
These hole types match up to kinds of holes to drill
Namespace: DesignData.SDS2.Setup
Assembly: DesignData.SDS2.Setup.dll
Syntax
public enum HoleTypeFields
| Name | Description |
|---|---|
| AnchorBolt | A hole intended for anchor bolts on a column base plate |
| ClevisPinHole | |
| CNCBendMark | |
| CNCConverted | |
| Cope | A hole in the radius of a cope. These holes are not matchable on other material. |
| ErectionPin | A hole on the end of a column for use by cranes, to lift the column into place. |
| Grout | A hole for pouring grout under a base plate |
| LongSlot | Similar to a ShortSlot, but with a longer slot length (2.5" for a 1" diameter bolt) |
| MachineToolHole | |
| Oversize | A round hole, typically 3/16ths of an inch larger than the input bolt diameter. |
| PlugWeld | A hole added before plug welding. These are not matchable to other material. |
| ShortSlot | An oblong shaped hole, diameter is typically 1/16th of an inch larger than the input bolt diameter. |
| StandardRound | A standard, perfectly round, hole. |
| UserSlot1 | Slot holes controlled by user driven slot settings in job setup. |
| UserSlot2 | Slot holes controlled by user driven slot settings in job setup. |
| Vent | A vent or drain hole for galvanizing. These are not matchable to other material. |